Free Shipping

Overview and Specifications:


Test condition: USB3.1 Gen 2 port, SSD
sequential write speed gt,1000MB/s

NVME M.2 SATA SSD is not included

Compatible with NVMe M.2 SSDs

Not compatible with M.2 SATA SSDs, M.2 PCIe
AHCI SSDs, or other M.2 non-NVMe devices

As with all SSDs, new media must be
formatted before use

Performance depends on host system,
workload, and SSD media used

SSDs use exceptionally high performance
storage media that will run hot when under load

Older SSD drives with less efficient flash
media may not perform as well as newer drives


This is the X870 NVMe M.2 SSD Storage
Expansion Board, which provides a complete storage solution for raspberry pi or
ROCK64. It supports multiple M.2 NVMe SSD lengths, including: 2280, 2260, 2242,


Ideal storage solution for Raspberry Pi –
M.2 NVMe SSD Shield

Supports up to 2TB M.2 NVMe SSD solid-state

Supports multiple M.2 NVMe SSD lengths,
including: 2280, 2260, 2242, 2230

Supports operating system installation and
booting from your SSD

Supports fastest OS image writing
( gt,1Gb/S*) from a PC or a Mac

Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s
bridge controller

USB2.0 connectivity offers plug-and-play
functionality on your Raspberry Pi

Quick file transfer with high-speed USB3.1
Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC or a Mac

LED blue indicator indicates drive status

On-board micro-USB socket and XH2.5
connector allow external power supply to power high capacity SSD (Max

USB Bus-powered

Specially-made short USB Type-C to USB-A
3.0 cable to connect with Raspberry Pi

Fully compatible with X720, X730 and X735
for intelligent and safe power management

PCB Size: 87mm x 56mm

Power Supply Request

5Vdc +/-5%, Powered by Raspberry Pi

Additional power supply for SSD (Only when
you find that the power supply of the SSD is insufficient)

5Vdc via on-board micro-USB or XH2.5 2Pin

Leave a Comment