Free Shipping

Overview and Specifications:

The video cable is connected to the monitor, and the power cable is connected to the taillight power supply. When the vehicle is reversed, the reversing monitoring system automatically starts working, and the situation behind the car can be clearly seen.

Factory tested by high-pressure water immersion test and 12-hour power-on aging test, multi-layer waterproof design, truly high-pressure rinsing and immersion waterproof. Installed at the tail handle and license plate light, with self-tapping screws

With reversing reference line (electronic ruler line), obstacle distance is clear at a glance Digital sensor chip processing, night vision effect is obvious

The CCD digital fill light image sensor is specially designed for the rear view of the car. It uses digital fill light and software technology to make the daytime image clear and the night low illumination. The viewing angle of 170° is large and the reversing range is safer. The temperature range of -30°C to +60°C is fully compatible with automotive environment applications.
Field of view angle: 170 degrees
Optical lens: EFL = 1.8mm
System: PAL/MTSC
Post rate: 30fps
Minimum illumination: 0.2Lux
Working voltage: 8-15V DC
Working current: 60mA
Working temperature: -20~+85 degrees, RH95%
Waterproof index: IP67

Product add-on features:
1.Automatic heating function: When the working temperature of the surrounding environment of the camera is lower than 10 °C, the camera will automatically heat up and automatically stop heating when the temperature reaches 30 degrees.

2.Punch cameras are equipped with dedicated perforated bricks

Leave a Comment