Overview and Specifications:
1, this machine is suitable for 12V car tires,
2, also applies to motorcycles, bicycles, balls, rubber boats,
beach floating beds, inflatable toys and so on.
3, on the highway, in the wild or in the morning to work, the
tires suddenly leaked or the tires are injected, and can play the first aid.
4, car tires maintain the correct tire pressure, to ensure safe
driving, and save gasoline, with the car, just in case, the endless use.
5, with a full set of inflatable nozzles, can be used for
tires, rubber boats, air cushions, inflatable toys, ball inflatable and many
【Instructions for use】:
1. Insert the nozzle at the top of the rubber tube directly
into the valve of the tire. When the sound of the air leaking from the tire is
heard, it means that the air has already circulated, and the air nozzle is
continued to be tightened. At this time, the air is no longer discharged.
2. Insert into the DC12V cigarette lighter
3. When inflating, the meter pointer increases with the
saturation of the tire. When the pointer reaches the appropriate tire pressure
(the tire pressure of the car tire is 223kpa=35PSI), the plug and the nozzle are
taken out, and the work is completed.
4. Please use the professional ball needle and plastic nozzle
equipped with this machine to connect with the air nozzle to inflate the ball
and other gas-demanding equipment.
1, can not be used in large and overweight vehicle tire
inflation, such as trucks, large trucks, box trucks, etc.,
2, please use the car engine to enhance the power when using,
do not consume car battery power,
3. This machine is limited to DC (DC12V) power supply. Do not
use household high voltage AC (AC220V) power supply,
4. When inflating, please stop after 10 minutes of continuous
operation for 10 minutes to prevent damage to the air pump and accessories, and
extend the life of the motor. When the rubber boat is inflated, it can work
continuously for 30 minutes,
5. When the general tire is inflated, it can reach 30PSI normal
tire pressure in about 3-5 minutes, and the big tire will be longer. If the
indicator of the meter rises rapidly to 50-100PSI when starting to inflate, the
air is blocked. The air does not enter the tire. At this time, the gas nozzle
joint should be removed immediately and re-operated, otherwise the motor and the
instrument are easily damaged.
6. When using, do not leave the body, pay attention to the tire
pressure at any time, not too saturated,
7. After the machine is used, the air nozzle wrench must be
straightened to avoid the rubber elastic fatigue inside,
8. The fuse of the gas pump is equipped with a fuse. If the air
pump does not start, please open the plug to check and replace it (the fuse is
9. This machine should avoid moisture, heavy fall and sand
intrusion, and avoid children playing to avoid damage,
10. The pressure required for each type of tire is different.
Please refer to the side of the car tire, or ask the car manufacturer.
[product size]: about 15 * 21cm
[product material]: ABS
[product weight]: gross weight (about) 1.1kg
[Power cord length]: about 285 cm
[product packaging]: color box packaging color box size
[output power]: 120 (W)
[rated voltage]: DC12 (V)
[inflating flow rate]: 35L/min
[Lighting]: 4 LEDs
[Outer box size]: 53X36.5X47cm
[Outer box entry number]: 20pcs/ctn